--- title: "Installing the Cloud Collector" slug: "installing-the-cloud-collector" tags: ["Install and Get Started", "Helix", "Sec Ops and Analytics"] updated: 2026-09-09T09:57:24Z published: 2026-09-09T09:57:24Z canonical: "docs.trellix.com/installing-the-cloud-collector" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Installing the Cloud Collector 1. From the **Boot** menu, use the arrow and Enter keys to select **Install Cloud Collector Sensor Software Appliance**, and then press **Enter**. ![boot_menu.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-2e35ec5b-694b-fe4c-befa-6acc0b1575b6.png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A24%3A14Z&se=2026-11-20T10%3A24%3A14Z&sr=c&sp=r&sig=w9niuYk5236FV9jtxQxEfK8A7G%2F%2FSPWGzmxGNKtd1gs%3D) 2. If you are installing the Cloud Collector Sensor Software Appliance and have provisioned your hardware with additional hard drives to provide more storage for network PCAPs, you will be prompted to select the drive on which you would like to install the operating system. Enter the drive label and press **Enter**. ![drive_label.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-c1a62eb1-d2fc-d9d3-8d3d-8a893aece21f.png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A24%3A14Z&se=2026-11-20T10%3A24%3A14Z&sr=c&sp=r&sig=w9niuYk5236FV9jtxQxEfK8A7G%2F%2FSPWGzmxGNKtd1gs%3D) 3. You will then be asked if you would like to use the same device for PCAP storage. You will not typically store PCAPs on the same drive as the operating system. Type `no` and press **Enter**. 4. Enter the drive label of the device you want to use for PCAP storage and press **Enter**. 5. Type **Yes** and press **Enter** to acknowledge that continuing will destroy all data on this device and will perform a new OS installation. 6. When installation is complete, press **Enter** to reboot.