--- title: "Instance groups to configure auto-scaling for Virtual IPS Sensors" slug: "instance-groups-to-configure-auto-scaling-for-virtual-ips-sensors-2" tags: ["Product Usage"] updated: 2026-11-19T12:28:47Z published: 2026-11-19T12:28:47Z canonical: "docs.trellix.com/instance-groups-to-configure-auto-scaling-for-virtual-ips-sensors-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Instance groups to configure auto-scaling for Virtual IPS Sensors To crete instance groups to configure auto-scaling for Virtual IPS Sensors, perform the following steps: 1. Log in to the Google Cloud and select **Compute Engine**. 2. In the left panel, under **Instance groups** , select **Instance groups** and click **create instance group**. The **Create instance group** page is displayed. 3. Select **New managed instance group** and enter the following details: 1. **Name**: Define the name of your instance group. > [!TIP] > Tip > > The instance name must begin with a letter. It can contain only lowercase letters and hyphens (-) as special characters. 2. **Instance template** - Select the required instance template from the drop-down. 4. Go to **Location** and select the required **Region** and **Zone** from the drop-down. 5. Navigate to the **Autoscaling** section and enter the following details: 1. **Autoscaling mode**: Define the required mode from the drop-down. 2. **Minimum number of instances**: Define the minimum number of instances from the drop-down. 3. **Maximum number of instances**: Define the maximum number of instances from the drop-down. 6. Go to the **Autoscaling signals** and define the required signal type. > [!TIP] > Tip > > Trellix recommends using **Network In Total** for network speeds up to 1 Gbps. 7. Go to the **VM instance lifecycle** section and configure the following **Autohealing** parameters: 1. **Healthcheck**: Select the required healthcheck from the drop-down. 2. **Initial delay**: Enter `900 seconds` in the initial delay field. 3. **On failed health check**: Select the required action from the drop-down. 8. Click **Create**.