--- title: "Integrating with Nozomi Guardian using CLI" slug: "integrating-with-nozomi-guardian-using-cli-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:22:59Z published: 2026-11-17T09:22:59Z canonical: "docs.trellix.com/integrating-with-nozomi-guardian-using-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Integrating with Nozomi Guardian using CLI Nozomi Guardian Integrates with Network Detection and Response NDR to receive alerts and visualize OT and IoT assets. 1. Log into the NDR CLI using a terminal window or SSH client: 1. Using the NDR SSH protocol, log into the appliance with management interface's IP address or hostname. ```plaintext $ ssh npadmin@ ``` 2. Enter the password when prompted. The `hostname > prompt` is displayed after you have logged in. 2. Enter privileged mode on the NDR CLI. ```plaintext npadmin@hostname> enable ``` 3. Enter the `npadmin` password, when prompted. The password can be 5 to 24 characters long. ```plaintext [sudo] password for npadmin: ``` 4. Enter configuration mode. ```plaintext npadmin@hostname# configure system ``` The prompt changes to `npadmin@hostname(config)#` on the terminal indicating that configuration mode is enabled. 5. Type `nozomi` at the terminal and press `Enter`. ![Nazomi_AddServer.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-7239d13c-ddc0-7d01-f096-eb0decb04eb4(4).png?sv=2026-02-06&spr=https&st=2026-11-19T11%3A42%3A21Z&se=2026-11-19T12%3A42%3A21Z&sr=c&sp=r&sig=lPug0N1DOeq%2FK1alDj%2FwaZA6iKy9eK8bHN7CKTUogfA%3D) 6. Type `A` and then press `Enter` to add a new nozomi server. ![Nozomi_server_details.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-c1992c3a-ad91-399e-abe2-21c779377459(4).png?sv=2026-02-06&spr=https&st=2026-11-19T11%3A42%3A21Z&se=2026-11-19T12%3A42%3A21Z&sr=c&sp=r&sig=lPug0N1DOeq%2FK1alDj%2FwaZA6iKy9eK8bHN7CKTUogfA%3D) 7. In the **Add Server** page, provide the details of the nozomi server. 1. Type `1` and press `Enter`. Specify a name for the integration. 2. Type `2` and press `Enter`. Specify a description for the integration. 3. Type `3` and press `Enter` to toggle the server status to Enable. By default the server status is disabled. 4. Type `4` and press `Enter`. Specify the URL of the Nozomi server. 5. Type `5` and press `Enter`. Specify api key name for authentication. 6. Type `6` and press `Enter`. Specify api key token for authenticating with the Nozomi Server. 7. Type `7` and press `Enter`. Specify the frequency at which Nozomi Server has to be polled to collect the latest asset data. 8. Type `8` and press `Enter`. Specify the frequency at which Nozomi Server has to be polled to collect the latest alerts data. 9. Type `9` and press `Enter` to enable/disable alerts and asset details polling from Nozomi server. 10. Type `S` and press `Enter` to save the configuration. The Nozomi server is added displaying its configuration details. 8. Type `T` and press `Enter` to verify the server connection. 9. To edit the server: ![Nozomi_2.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-f5ccb63b-ce3a-56b9-452e-ac439b0adfb5(4).jpg?sv=2026-02-06&spr=https&st=2026-11-19T11%3A42%3A21Z&se=2026-11-19T12%3A42%3A21Z&sr=c&sp=r&sig=lPug0N1DOeq%2FK1alDj%2FwaZA6iKy9eK8bHN7CKTUogfA%3D) 1. Type the number next to the sever you want to edit and then press `Enter`. 2. Type `E` and press `Enter` to edit the server configuration details. 3. Perform all steps from step 7 to change the server details. 4. Type `S` and press `Enter` to save the configuration and exit. 10. To delete the server: 1. Type the number next to the sever you want to delete and then press `Enter`. 2. Type `D` and press `Enter` to delete the server. 3. Type `1` to confirm on deleting the server. 11. Type `X` and press `Enter` to exit the configuration.