--- title: "Integrating with Trellix ePolicy Orchestrator" slug: "integrating-with-trellix-epolicy-orchestrator-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:22:59Z published: 2026-11-17T09:22:59Z canonical: "docs.trellix.com/integrating-with-trellix-epolicy-orchestrator-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Integrating with Trellix ePolicy Orchestrator > [!NOTE] > Note > > The integration capability is available only to users with an **Enterprise** or **Core** license. Trellix ePolicy Orchestrator - On-premises is a scalable platform for centralized policy management and enforcement of your system security products, such as anti-virus, desktop firewall, and anti-spyware applications. You can integrate Network Detection and Response NDR System with Trellix ePO - On-prem. The integration enables you to query Network Detection and Response ePO - On-prem server from the Network Detection and Response NDR for viewing details of a network host. The integration bridges the gap between network-centric and endpoint-centric security data, providing more context for analysis. 1. Log into the NDR CLI using a terminal window or SSH client: 1. Using the SSH protocol, log into the appliance with management interface's IP address or hostname. ``` $ ssh npadmin@ ``` 2. Enter the password when prompted. The `hostname > prompt` is displayed after you have logged in. 2. Enter privileged mode on the NDR CLI. ``` npadmin@hostname> enable ``` 3. Enter configuration mode. ``` npadmin@hostname# configure system ``` The prompt changes to `npadmin@hostname(config)#` on the terminal indicating that configuration mode is enabled. 4. Type `epo configure` at the terminal and press `Enter`. The **ePO Configuration** options are displayed. ![epo_config.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-42a8e7ef-3062-5f23-81ec-16843557228a(4).png?sv=2026-02-06&spr=https&st=2026-11-19T11%3A42%3A22Z&se=2026-11-19T12%3A42%3A22Z&sr=c&sp=r&sig=ASbXe67xA%2BYAIrG94NI4pCdm1TbToG8vPNwJlvjeeDE%3D) 1. Type `3` and press `Enter` to enable integration. 2. Type `1`and press `Enter` to specify a unique identifier for this integration. 3. Type `2`and press `Enter` to specify the details about the purpose of this integration. 4. Type `4`and press `Enter` to define the network address of the ePO server to connect to. 5. Type `5`and press `Enter` to specify the communication port used to interact with the ePO server. 6. Type `6`and press `Enter` to add a account name used for authentication with the ePO server. 7. Type `7`and press `Enter` to add the secret key used to authenticate the connection to the ePO server. 8. Type `8`and press `Enter` to check whether data from this integration will be used to enhance alerts. 9. Type `9`and press `Enter` to set the frequency at which Network Detection and Response retrieves data from ePO. 10. Type `10`and press `Enter` to check if Network Detection and Response is actively sending tasks or commands to ePO. 11. Type `11`and press `Enter` to allow assigning a label to this integration for easier organization and filtering. 5. Type `D` and press `Enter` to delete ePO configuration. 6. Type `T` and press `Enter` to test connection to NDR. 7. Type `Q` and press `Enter` exit the configuration page. 8. Type `S` and press `Enter` to save and exit to the main menu.