--- title: "Integrating with Trellix Intrusion Prevention System (IPS)" slug: "integrating-with-trellix-intrusion-prevention-system-ips-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:22:59Z published: 2026-11-17T09:22:59Z canonical: "docs.trellix.com/integrating-with-trellix-intrusion-prevention-system-ips-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Integrating with Trellix Intrusion Prevention System (IPS) ### Enabling NDR integration in the manager Enabling NDR integration in the Manager consists of the following two tasks: - Configuring a Client Group created on the NDR appliance in the Manager. - Enabling association of the Client Group configured on the Manager at the domain level or device level. ### Configuring a client group created on the NDR appliance When any client group created on an NDR appliance has been configured on the Manager, you can enable its association per domain or per device to complete the task of NDR integration in the Manager. > [!NOTE] > Note > > Make sure that you have configured the required Client Profile and Client Group on the NDR appliance. For more information how to configure a Client Profile and Client Group using the NDR CLI. **Perform the Following steps to add a client group in the manager**. 1. Login to the Manager and navigate to **Devices > Admin Domain Name > Global** tab. 2. Select **IPS Device Settings > NI Integration**. The NDR integration page is displayed in the Manager. 3. Go to the **Client Group Configuration** tab and click the **+** icon to add client group. 4. In the **Create New Client Group** panel, specify the following: 1. **Client Group**: Client group name as configured on the NDR appliance. 2. **NDR Appliance IP Address**: The IPv4 address of the NDR appliance on which the Client Group has been configured. 3. **Token**: The authentication hash token of 32 bytes attached to the specific Client Group being configured. 5. Click **Save**. An message stating the successful addition of the client group appears. ### Enabling association of the client group configured on the manager at the domain level or device level The client group is added under the **Client Group Configuration** tab. You can now enable its association at the domain level from **Global > IPS Device Settings > NDR configuration > Client Group association** tab. 1. Select the **Enable Association with NDR Appliance** checkbox. 2. Select the required **Client Group** from the drop-down list, if the Client Group has been added in the Manager using the **Devices > Admin Domain Name > Global > IPS Device Settings > NDR Integration > Client Group Configuration** tab. 3. The IP address of the NDR appliance appears by default in the field once you specify the Client Group. 4. Click **Save**. ### Enabling the association of a client group at the device level You can enable association at the device level from **Devices > Setup > NDR configuration > Client Group** **Association** tab. 1. Select the **Enable Association with NDR Appliance** checkbox to start the process of enabling Client Group association for the selected Sensor. 2. Select the required **Client Group** from the drop-down list, if the Client Group has been added in the Manager using the **Devices > Admin Domain Name > Global > IPS Device Settings > NDR Integration > Client Group Configuration** tab. 3. The IP address of the NDR appliance appears by default in the field once you specify the Client Group. 4. Click **Save**. A successful completion message is displayed.