--- title: "interface ether<1 or 2> ip address" slug: "interface-ether-1-or-2-ip-address" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:28:47Z published: 2026-11-19T12:28:47Z canonical: "docs.trellix.com/interface-ether-1-or-2-ip-address" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # interface ether<1 or 2> ip address This CLI allows you to configure the public and private IP addresses for the NIC interfaces. **Syntax:** `interface ether1 ip address <IP address><netmask>` and `interface ether2 ip address <IP address><netmask>` The following table lists the parameters: | Parameter | Description | | --- | --- | | IP address | Provide the required IP address to configure the Manager appliance. | | netmask | Provide the netmask for an IP address. | **Sample Output:** ``` IPSManager (config) # interface ether1 ip address 1.1.1.4 255.255.255.0 IPSManager (config) # show configuration ## Network interface configuration ##   interface ether1 create   interface ether1 comment "" no interface ether1 dhcp   interface ether1 display   interface ether1 duplex auto   interface ether1 ip address 1.1.1.4 /24   interface ether1 mtu 1500 no interface ether1 shutdown   interface ether1 speed auto no interface ether1 zeroconf ``` > [!TIP] > Tip > > To enable the IPv6 address, execute the command: `interface ether1 ipv6 enable` and `interface ether2 ipv6 enable`.