--- title: "interface ether1 duplex { <duplex> | half | full | auto }" slug: "interface-ether1-duplex-duplex-half-full-auto" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:54Z published: 2026-08-04T17:22:54Z canonical: "docs.trellix.com/interface-ether1-duplex-duplex-half-full-auto" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # interface ether1 duplex { <duplex> | half | full | auto } Configures the ether1 interface duplex. ### Syntax `<no> interface ether1 duplex {<duplex> | half | full | auto}` ### Parameters `no` Disables the interface duplex. `duplex` Specifies the interface duplex. `half` Half duplex. `full` Full duplex. `auto` Automatically detects the duplex. ### Examples The following example configures the half duplex: `hostname (config) # interface ether1 duplex half` The following example disables the half duplex: `hostname (config) # no interface ether1 duplex half` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before Release 6.4 - **Central Management System:** Before Release 6.4 - **Email Security — Server:** Before Release 6.4 - **File Protect:** Before Release 6.4 - **Network Security:** Before Release 6.4 - **Intelligent Virtual Execution - Server:** Before Release 6.4