--- title: "interface ether1 mtu <MTU in bytes>" slug: "interface-ether1-mtu-mtu-in-bytes" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:54Z published: 2026-08-04T17:22:54Z canonical: "docs.trellix.com/interface-ether1-mtu-mtu-in-bytes" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # interface ether1 mtu <MTU in bytes> Configures the MTU of the ether1 interface. ### Syntax `<no> interface ether1 mtu <MTU in bytes>` ### Parameters `no` Disables MTU on the interface. `MTU in bytes` The maximum size of outbound packets, (in bytes), for the specified interface. The default is 1500. ### Examples The following example enables MTU on the interface: `hostname (config) # interface ether1 mtu 1400` The following example disables MTU on the interface: `hostname (config) # no interface ether1 mtu 1400` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before Release 6.4 - **Central Management System:** Before Release 6.4 - **Email Security — Server:** Before Release 6.4 - **File Protect:** Before Release 6.4 - **Network Security:** Before Release 6.4 - **Intelligent Virtual Execution - Server:** Before Release 6.4