--- title: "interface ether1 speed { <speed> | 10 | 100 | 1000 | 10000 | auto}" slug: "interface-ether1-speed-speed-10-100-1000-10000-auto" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:54Z published: 2026-08-04T17:22:54Z canonical: "docs.trellix.com/interface-ether1-speed-speed-10-100-1000-10000-auto" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # interface ether1 speed { <speed> | 10 | 100 | 1000 | 10000 | auto} Configures the speed of the ether1 interface. ### Syntax `<no> interface ether1 speed { <speed> | 10 | 100 | 1000 | 10000 | auto }` ### Parameters `no` Freezes the interface speed. `speed` Specifies the interface speed. When the speed is set to auto, the duplex mode is also set to auto-negotiated. If the speed is set manually, the duplex mode is queried and set to the detected value. There are six options for speed: - (manual) - 10 Mbps - 100 Mbps - 1000 Mbps - 10000 Mbps - auto ### Examples The following example sets the speed of the interface to 10 Mbps: `hostname (config) # interface ether1 speed 10` The following example freezes the speed of the interface: `hostname (config) # no interface ether1 speed 10` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before Release 6.4 - **Central Management System:** Before Release 6.4 - **Email Security — Server:** Before Release 6.4 - **File Protect:** Before Release 6.4 - **Network Security:** Before Release 6.4 - **Intelligent Virtual Execution - Server:** Before Release 6.4