--- title: "interface <interface name> bridge-group ether2" slug: "interface-interface-name-bridge-group-ether2" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:54Z published: 2026-08-04T17:22:54Z canonical: "docs.trellix.com/interface-interface-name-bridge-group-ether2" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # interface <interface name> bridge-group ether2 Sets the bridge-group priority of the ether2 interface. ### Syntax `<no> interface <interface name> bridge-group ether2` ### Parameters `no` Resets the bridge-group priority of the ether2 interface. `interface name` The interface to be used as a bridge. ### Examples The following example sets the bridge-group priority of the interface: `hostname (config) # interface ether1 bridge-group ether2` The following example resets the bridge-group priority of the interface: `hostname (config) # no interface ether1 bridge-group A ether2` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before Release 6.4 - **Central Management System:** Before Release 6.4 - **Email Security — Server:** Before Release 6.4 - **File Protect:** Before Release 6.4 - **Network Security:** Before Release 6.4 - **Intelligent Virtual Execution - Server:** Before Release 6.4