--- title: "interface pether2 bridge-group <bridge group>" slug: "interface-pether2-bridge-group-bridge-group" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:58Z published: 2026-08-04T17:22:58Z canonical: "docs.trellix.com/interface-pether2-bridge-group-bridge-group" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # interface pether2 bridge-group <bridge group> Adds a bridge group to the pether2 interface. ### Syntax `<no> interface pether2 bridge-group <bridge group>` ### Parameters `no` Removes the bridge group. `bridge group` The bridge group name. ### Examples The following example adds pether2 to the bridge group A. `hostname (config) # interface pether2 bridge-group A` The following example removes pether2 from the bridge group C `hostname (config) # no interface pether2 bridge-group C` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before Release 6.4 - **Central Management System:** Before Release 6.4 - **Email Security — Server:** Before Release 6.4 - **File Protect:** Before Release 6.4 - **Network Security:** Before Release 6.4 - **Intelligent Virtual Execution - Server:** Before Release 6.4