--- title: "ip route vrf" slug: "ip-route-vrf" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:58Z published: 2026-08-04T17:22:58Z canonical: "docs.trellix.com/ip-route-vrf" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ip route vrf When the supported appliance is operating in layer 3 mode, this command configures or removes a static route for the specified VRF instance. > [!NOTE] > Note > > The following Network Security virtual appliances support layer 3 mode: NX 2500V, NX 2501V, NX 2550V, NX 4500V, and NX 6500V. ### Syntax `[no] ip route vrf <netNameSpace> <nextHop> [portName]` ### Parameters `<netNameSpace>` The network namespace for the VRF instance: - `vrfA`―Maps to monitoring port pairs pether3 and pether4. - `vrfB`―Maps to monitoring port pairs pether5 and pether6. - `vrfC`―Maps to monitoring port pairs pether7 and pether8. - `vrfD`―Maps to monitoring port pairs pether9 and pether10. `<nextHop>` The IPv4 address of the next-hop interface, specified in the following format: `<networkPrefix> {<netmask> | /<maskLength>}` where: - `<networkPrefix>` is the IPv4 network prefix specifying the network. Example: `192.168.225.0` - `<netmask>` is the IPv4 mask length in dotted decimal notation. Example: `255.255.255.0` - `/<maskLength>` is the IPv4 mask length in CIDR notation. Example: `/24` `<portName>` (Optional) The monitoring port name, such as pether3. If you do not specify a monitoring port, the next-hop address you specify is set for the default egress port (pether4, pether6, pether8, or pether10) associated with the VRF instance. `no` The `no` form of this command removes the specified static route from the specified VRF instance. ### Example The following example adds a static route for the VRF instance **vrfD**. ``` hostname (config) # ip route vrf vrfD 10.2.7.20 /24 pether9 ``` ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 9.0