--- title: "IP spoofing detection" slug: "ip-spoofing-detection-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/ip-spoofing-detection-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # IP spoofing detection The Anti-Spoofing feature enables the detection of packets that either originate from sources external to your network (inbound) which use your internal addresses as the source IP addresses, or originate from your internal network (outbound) which use IP addresses not defined in your customized list of *good* addresses. > [!NOTE] > Note > > In these sections, the term *IP spoofing detection* refers to the detection of IP-spoofed attacks, whereas the term *Anti -Spoofing* refers to the feature in Trellix IPS that detects these attacks. You can apply IP address spoofing detection to any inline interface that has been previously segmented by CIDR-based addressing. A Sensor maintains a table of CIDR-based addresses it protects. Then, for example, if it detects a packet that originated from outside your network but contains an identified internal address, it just drops the packet. Any port pair in inline mode that has been segmented by CIDR addressing is eligible for IP spoofing detection. This includes any CIDR-segmented subinterfaces of an eligible port pair. For example, port pair G0/1-G0/2 protects the 192.16.1.0/24 and 192.16.2.0/24 networks in inline mode. You create the subinterface *Payroll-Server* to protect host 192.16.1.1/32. When you enable IP spoofing detection for G0/1-G0/2, all three addresses are checked for IP spoofing attacks.