--- title: "ipmi firmware reload" slug: "ipmi-firmware-reload" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:58Z published: 2026-08-04T17:22:58Z canonical: "docs.trellix.com/ipmi-firmware-reload" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ipmi firmware reload Perform a warm or cold firmware reload. Reloading the firmware is sometimes needed to return the IPMI service to a functional state. If an update has been interrupted by a reload, repeat the update. If the update fails, please contactTrellix customer service. > [!WARNING] > Caution > > Do not reload the IPMI firmware, reload the system, or turn the power off and on while a firmware update is in progress because an incomplete firmware update will make the IPMI interface inoperative. Usually, you can recover from interrupted updates by entering the **ipmi firmware update latest** command again. However, in some cases of incomplete updates, you might have to shut down and disconnect the system power for a period of time or, in rare cases, contact FireEye Support. ### Syntax ipmi firmware reload {warm | cold} ### Parameters **warm** Reload the IPMI firmware without interrupting the power. **cold** Reload the IPMI firmware and physically turn off the power and turn it back on again. ### Example The following example performs a warm IPMI firmware reload. ``` hostname # ipmi firmware reload warm ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **File Protect:** Release 7.5.0.