Sensors receive the fragmented packets and hold them until all the fragments arrive or the fragment timer expires. After the fragment timer expires (the default value is set to 2 minutes), the fragments are dropped.
This command allows you to configure the Sensor to forward such fragments instead of dropping them.
Syntax
ipreassembly timeout forward <enable|disable>
Note
This configuration is persisted across Sensor reboots.
| Parameter | Description |
|---|---|
| enable | Enables the packet fragments to be forwarded |
| disable | Disables the packet fragments to be forwarded |
ipreassembly timeout forward status
It displays the status of the ipreassembly timeout forward (enabled or disabled).
Sample Output:intruShell@john> ipreassembly timeout forward enable
IP Reassembly timeout forward : ENABLED
IPv4 Reassembly timeout frag forward count : 0
IPv6 Reassembly timeout frag forward count : 0
Applicable to:
NS-series Sensors