--- title: "ips apply" slug: "ips-apply" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:58Z published: 2026-08-04T17:22:58Z canonical: "docs.trellix.com/ips-apply" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ips apply Applies or removes an IPS policy on a monitoring interface. You can apply the rule-selection criteria (match attributes, exclusion list, and inclusion list) of the specified IPS policy to the network traffic passing through the specified monitoring interface. The system automatically sets the value of the policy's **active** attribute to `yes`. If a different IPS policy was already active on the interfaces, the system automatically removes that policy from the interfaces before applying the new policy. For more information, see the Network Security IPS Feature Guide. > [!NOTE] > Note > > You can also run this command remotely from the command line of an integrated Central Management System appliance using the central management appliance proxying mechanism. ### Syntax `[no] ips apply {all | <policyName> interface <interfaceName>}` ### Parameters `no` Use the **no** form of the command to explicitly remove the specified IPS policy from the specified monitoring interface or to remove all IPS policies from all interfaces. When the interface is not associated with an IPS policy, traffic that passes through the interface is analyzed using standard Network Security content rules only. `all` Remove all IPS policies from all monitoring interfaces. Supported for the **no** form of the command only. `<policyName>` Name of the IPS policy to apply to monitoring interfaces on the Network Security appliance. `interface` `<interfaceName>` Apply the specified policy to the specified monitoring interface: - **A**—Monitoring interfaces labeled **pether3** and **pether4**. - **B**—Monitoring interfaces labeled **pether5** and **pether6** (on appliances with two port pairs). ### Examples ##### ips apply Trellix_Default interface A ``` hostname (config) # ips apply Trellix_Default interface A ``` ##### ips apply Default_Server_Protection interface B ``` hostname (config) # ips apply Default_Server_Protection interface B ``` ##### no ips apply Default_Server_Protection interface B ``` hostname (config) # no ips apply Default_Server_Protection interface B ``` ### User role Operator or Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 7.2.0