--- title: "ips blockmode" slug: "ips-blockmode" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:58Z published: 2026-08-04T17:22:58Z canonical: "docs.trellix.com/ips-blockmode" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ips blockmode By default, IPS blockmode is enabled. To disable IPS blockmode, restore IPS blockmode, or force blocking for all IPS rules, use one of the **ips blockmode** commands. > [!NOTE] > Note > > You can also run this command remotely from the command line of an integrated Central Management System appliance using the central management appliance proxying mechanism. ### Syntax `ips blockmode disabled` | `no ips blockmode` | `ips blockmode all` ### Parameters On an IPS-enabled appliance deployed inline and with a monitoring interface configured for inline deployment, manage the IPS blockmode setting. `ips blockmode disabled` Disable IPS blockmode. Traffic that matches an active IPS rule is allowed to pass, even for IPS rules that specify blocking. With IPS blockmode disabled, the appliance operates in detection-only mode for IPS rules. Matched traffic can still generate a IPS event, IPS alerts, and (if configured) IPS event notifications. `no ips blockmode` Re-enable IPS blockmode. Traffic that matches an active IPS rule is blocked or allowed as specified by the block action of the rule. If the matched IPS rule specifies the block action value **blockable**, the system handles the matched traffic as if the block action value were **noblock**, except that you can override the **blockable** action on a per-rule basis only. `ips blockmode all` Force all matched IPS rules to block traffic. Traffic that matches an active IPS rule is blocked, even for IPS rules that specify no blocking. Matched traffic can still generate an IPS event and (if configured) IPS event notifications. ### Examples ##### ips blockmode disabled ``` hostname (config) # ips blockmode disabled ``` ##### no ips blockmode ``` hostname (config) # no ips blockmode ``` ##### ips blockmode all ``` hostname (config) # ips blockmode all ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 7.2.0. The **ips blockmode all** form of the command was introduced in Release 7.5.0.