--- title: "ips brute-force threshold" slug: "ips-brute-force-threshold" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:58Z published: 2026-08-04T17:22:58Z canonical: "docs.trellix.com/ips-brute-force-threshold" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ips brute-force threshold Configures the IPS detection threshold for brute-force attacks on an IPS-enabled appliance. You can configure the login failure event threshold for triggering a brute-force event. For more information, see the Network Security IPS Feature Guide. > [!NOTE] > Note > > You can also run this command remotely from the command line of an integrated Central Management System appliance using the central management appliance proxying mechanism. ### Syntax `ips brute‑force threshold` `<value>` ### Parameters `<value>` The appliance triggers an IPS brute-force event when the number of failed login attempts to or from the same IP address within a rolling 60-second window exceeds this value. The valid range is 5 through 1000. The default value is 5. The valid range is 5 through 1000. The default value is 5. ### Example ``` hostname (config) # ips brute-force threshold 10 ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 7.5.0