--- title: "ips detail-filter" slug: "ips-detail-filter" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:58Z published: 2026-08-04T17:22:58Z canonical: "docs.trellix.com/ips-detail-filter" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ips detail-filter Enables detailed packet inspection on an IPS-enabled appliance. This command configures the IPS-enabled engine to perform detailed packet inspection for a list of protocol ports. The list of protocol ports is dynamic, and Trellix controls the list through periodic updates of IPS security content. IPS detailed packet inspection is useful for inspecting traffic flows to email protocols and detecting brute-force attacks. IPS detailed packet inspection may slow IPS processing. For more information, see the Network Security IPS Feature Guide. > [!NOTE] > Note > > You can also run this command remotely from the command line of an integrated Central Management System appliance using the central management appliance proxying mechanism. ### Syntax [`no`] `ips detail‑filter` ### Parameters `no` Use the **no** form of this command to disable IPS detailed filtering. ### Default This feature is disabled by default. ### Examples ##### ips detail‑filter ``` hostname (config) # ips detail‑filter ``` ##### no ips detail‑filter ``` hostname (config) # no ips detail‑filter ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 7.5.0