--- title: "ips enable" slug: "ips-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:58Z published: 2026-08-04T17:22:58Z canonical: "docs.trellix.com/ips-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ips enable Activates IPS features on a monitoring interface. For more information about IPS, see the Network Security IPS Feature Guide. > [!NOTE] > Note > > You can also run this command remotely from the command line of an integrated Central Management System appliance using the central management appliance proxying mechanism. ### Syntax `[no] ips enable` ### Parameters `no` Use the **no** form of the command to administratively remove IPS feature activation. ### Example ##### ips enable ``` hostname (config) # ips auto‑update enable ``` ### User role Operator or Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 7.9.1. The command was deprecated in Release 8.3.2.