--- title: "ips reconnaissance enable" slug: "ips-reconnaissance-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:58Z published: 2026-08-04T17:22:58Z canonical: "docs.trellix.com/ips-reconnaissance-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ips reconnaissance enable Enables IPS detection of reconnaissance activity on an IPS-enabled appliance. You can enable the IPS-enabled engine to detect reconnaissance activity. To display the status of IPS alerts for reconnaissance activity, use the **show ips reconnaissance** CLI command in enable mode. For more information, see the Network Security IPS Feature Guide. > [!NOTE] > Note > > You can also run this command remotely from the command line of an integrated Central Management System appliance using the central management appliance proxying mechanism. ### Syntax [`no`] `ips reconnaissance enable` ### Parameters `no` Use the no form of this command to disable the feature. ### Default IPS detection of reconnaissance activity are disabled by default. ### Examples ##### ips reconnaissance enable ``` hostname (config) # ips reconnaissance enable ``` ##### no ips reconnaissance enable ``` hostname (config) # no ips reconnaissance enable ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 7.5.0