--- title: "Issues with Quarantine" slug: "issues-with-quarantine-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:28:23Z published: 2026-11-19T12:28:23Z canonical: "docs.trellix.com/issues-with-quarantine-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Issues with Quarantine Trellix IPS enables you to quarantine your network hosts when required. There are two ways to quarantine hosts: - Configure the Sensor to quarantine hosts automatically when they generate specific attacks. - Manually quarantine specific hosts that are listed in the **Attack Log** page. - You can manually add endpoints to quarantine from the **Quarantine** page. You might see the following issues while quarantining: - When you quarantine a host from attack log but the host is not listed in the quarantine page, and the host is stuck. - Quarantine page has a host that is not deleted after the expiry time. You might also see an error when manually deleting a host from the Quarantine page. To confirm if it is a quarantine issue, put the Sensor in Layer 2 or add the host IP address to the **Quarantine Exceptions** list and check if the issue is resolved. If the issue is not resolved, contact Trellix Support.