--- title: "latency-monitor" slug: "latency-monitor-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:40Z published: 2026-11-19T12:29:40Z canonical: "docs.trellix.com/latency-monitor-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # latency-monitor This command disables the latency monitoring feature or displays the status of latency monitoring feature. **Syntax:** `latency-monitor <disable | status>` **Default Value:** Latency monitoring feature is disabled by default. If disabled, latency monitoring feature does not generate any alert nor does it forward the traffic to layer2 when high latency is observed. `latency-monitor status` If latency monitoring is enabled, the following information is displayed: - latency monitoring status (enable or disable) - configured action (alert-only or layer2-forward) **Sample Output:** `intruShell@john> latency-monitor status` `latency monitor : Enable` `action : alert` `restore inline from layer2 : disable` `sensitivity Level : low` `Unknown-protocol Packets Forwarded Percentage : 0.000000` `Unknown-protocol Packets Forwarded Count : 0` `Percentage of Packets Forwarded under Latency : 0.000000` **Applicable to:** NS-series Sensors