--- title: "latency-troubleshooting" slug: "latency-troubleshooting-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:25Z published: 2026-11-19T12:27:25Z canonical: "docs.trellix.com/latency-troubleshooting-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # latency-troubleshooting This CLI is used to start, check status, stop, run, add, delete, list the configured commands, modify the frequency of execution, and collect logs from the trace. It has the following parameters: | Parameter | Syntax | Description | | --- | --- | --- | | start | `latency-troubleshooting start` | Starts latency troubleshooting | | status | `latency-troubleshooting status` | Check the current status of latency troubleshooting | | stop | `latency-troubleshooting stop` | Stops latency troubleshooting | | command | add | `latency-troubleshooting command add <"idscli+COMMAND">` | Add a command to the list | | delete | `latency-troubleshooting command delete <"idscli+INDEX">` | Delete a command from the list | | list | `latency-troubleshooting command list` | Lists all added commands | | run | `latency-troubleshooting run` | Run latency troubleshooting once | | set | frequency | `latency-troubleshooting set frequency <number>` | Modify the frequency of run | | rollover_limit | `latency-troubleshooting set rollover_limit <number>` | Sets the number of logs to retain | **Syntax:** `latency-troubleshooting command delete "idscli+50"` **Sample output:** ``` IntruDbg#> latency-troubleshooting command delete "idscli+50" Successfully deleted command: 'show h2 streams' from mode: 'idscli' ``` **Applicable to:** NS-series and Virtual IPS Sensors