--- title: "Launching a virtual NDR appliance on AWS" slug: "launching-a-virtual-ndr-appliance-on-aws" tags: ["Install and Get Started", "NDRC 4.x", "Customer", "Network Security", "NDR 4.x"] updated: 2026-09-16T09:56:00Z published: 2026-09-16T09:56:00Z canonical: "docs.trellix.com/launching-a-virtual-ndr-appliance-on-aws" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Launching a virtual NDR appliance on AWS This section describes how to launch a virtual NDR Console instance on AWS (Amazon Web Services). > [!WARNING] > Important > > The navigation instructions and user interface may vary based on the AWS Management Console version that is running when you launch your instances. > [!NOTE] > Note > > This procedure covers the required settings for a Trellix virtual appliance. You can accept the default values for the other settings, or specify values that are appropriate for your environment. To launch an instance in AWS: 1. Go to the AWS login page and log in using your AWS ID. 2. Navigate to the AWS Management Console. 3. In the navigation bar, at the top of the console, select the region for the instance. 4. In the **AWS services** section, select **EC2**. 5. Click **Launch Instance** in the **Create Instance** section. 6. On the **Choose an Amazon Machine Image (AMI)** page, locate the AMI for the NDR Console instance. For example, locate " IA 4.0.0.xxxxx", then click **Select**. 7. On the **Choose an Instance Type** page, select one of the instance types listed in [Instance requirements](/network-and-platform/docs/aws-prerequisites). Then click **Next: Configure Instance Details**. 8. On the **Configure Instance Details** page: 1. Select the management network and subnet from the **Network** and **Subnet** drop-down lists, and specify other settings provided by your network administrator. The management interface requires an external IP address and netmask. > [!NOTE] > Note > > Specify an elastic IP address in the **Primary IP** field for the management interface (eth0) in the **Network interfaces** section at the bottom of the page. This enables external access to the instance. 2. Click **Next: Add Storage**. 9. On the **Add Storage** page: 1. Configure the **Root** device. Enter **120** in the **Size (GiB)** field and select **General Purpose SSD (gp2)** in the **Volume Type** field. 2. Click **Add New Volume** to add storage for the capture data. Select **EBS** in the **Volume Type** field, enter **16384** in the **Size (GiB)** field, and select **Throughput Optimized HDD (st1)** in the **Volume Type** field. At minimum 1.5 TB and maximum 16 TB per volume and a maximum of 2 volumes. Risk of data loss across as we strip across and EBS does not ensure no data loss occurs. 3. Repeat the previous step for each additional storage volume you need for anticipated bandwidth and retention. 4. Click **Next: Add Tags**. 10. (*If required by your AWS administrator*) On the **Add Tags** page, provide key and value combinations. Then click **Next: Configure Security Group**. 11. On the **Configure Security Group** page, select or add the security group that defines firewall rules that control traffic to the instance. At a minimum, include the security groups listed in [Instance requirements](/network-and-platform/docs/aws-prerequisites). Consider limiting access beyond the default network displayed on the **Configure Security Group** page. Click **Review and Launch**. 12. Use Amazon's version of the cloud-init package to specify settings that are applied to the Network Detection and Response Console on the initial boot. You enter the data in the user data as described in [Using cloud-init to configure Initial settings](/network-and-platform/docs/using-cloud-init-to-configure-initial-settings). 13. On the **Review Instance Launch** page, review the details about your instance. Click the appropriate **Edit** link if you need to make changes. When you are satisfied with the details, click **Launch**. 14. In the **Select an Existing key pair or create a new key pair** dialog box: 1. Select an existing pair or create a new one. To use the key pair you created when you were set up to use Amazon EC2, click **Choose an existing key pair**, and then select that key. > [!WARNING] > Important > > Store the name of the key pair and the private key in a secure location. 2. Select the checkbox to confirm that you agree to the acknowledgement statement, and then click **Launch Instances**. > [!NOTE] > Note > > You do not need to perform the initial configuration because the NDR Console instance is already configured with defaults that are applied during the first boot, and with settings that are optionally specified in user data before you launch the instance. You can then use the CLI or API to change settings as needed. For details, see the [NDR Console System Administration Guide](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/IA_SAG_2_1_pdf.pdf?sv=2026-02-06&spr=https&st=2026-11-22T21%3A21%3A14Z&se=2026-11-22T22%3A21%3A14Z&sr=c&sp=r&sig=ik9ilT5PPPufHS3rnJvnFi%2Bv6E%2BSQLCsY6KZKm8sZSs%3D) or*Trellix API Reference Guide**.*