--- title: "lcd" slug: "lcd" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:49Z published: 2026-08-04T17:21:49Z canonical: "docs.trellix.com/lcd" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # lcd To enable the Liquid Crystal Display (LCD) on the front panel of the Trellix appliance and specify the LCD settings (such as contrast, brightness, and idle timeout), use the **lcd** command in configuration mode. > [!NOTE] > Note > > Not all Trellix appliance models include an LCD. ### Syntax [**no**] **lcd actions enable** [**no**] **lcd auto-return***minutes* [**no**] **lcd blank-screen** [**no**] **lcd brightness***number* [**no**] **lcd contrast***number* [**no**] **lcd enable** [**no**] **lcd password***password* [**no**] **lcd sync-to-clock** ### Parameters | **no** | Use the **no** form of this command to disable the LCD settings. | | --- | --- | | **actions enable** | Enables configuration changes and other actions using the LCD panel. | | **auto-return** *minutes* | Number of minutes of inactivity before the LCD is reset to the default display (default is 5). | | blank-screen | Clears the LCD when the auto-return time expires (disabled by default). | | **brightness***number* | Number (0 to 9) that indicates the LCD brightness (default is 9). | | **contrast***number* | Number (0 to 9) that indicates the LCD contrast setting (default is 4). | | enable | Enables the LCD (enabled by default). | | **password***password* | Password required to use the LCD (none required by default). | | sync-to-clock | Synchronizes the time shown in the LCD to the system clock (enabled by default). | ### Example The following example sets the LCD idle timeout to 20 minutes. ``` hostname (config) # lcd auto-return 20 ``` ### User role Admin or Operator ### Command mode Config