--- title: "Linux configuration" slug: "linux-configuration" tags: ["Reference", "Helix", "Sec Ops and Analytics"] updated: 2026-09-02T19:14:18Z published: 2026-09-02T19:14:18Z canonical: "docs.trellix.com/linux-configuration" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Linux configuration Linux systems can utilize a number of different syslog tools to send logs to the Comm Broker. **To edit the Rsyslog configuration:** When configuring Rsyslog for CentOS and Red Hat 5 and 6, be sure the fully qualified domain name (FQDN) of the Comm Broker is registered in DNS, and the server can resolve the name correctly. 1. Open `/etc/rsyslog.conf` for editing. 2. Add the following lines to the body of the file: > [!NOTE] > Note > > In this script @ implies UDP is used, and @@ will use TCP. ``` # ### begin forwarding rule ### # These messages will log to the Communications Broker Auth.info @CommBroker.company.com:514 Authpriv.info @CommBroker.company.com:514 Cron.* @CommBroker.company.com:514 Daemon.crit @CommBroker.company.com:514 Kern.crit @CommBroker.company.com:514 Uncomment the following lines to cache logs on hard disk: $WorkDirectory /var/lib/rsyslog $ActionQueueFileName fwdRule1 $ActionQueueMaxDiskSpace 1g $ActionQueueuSaveOnShutdown on $ActionQueueType LinkedList $ActionResumeRetryCount -1 *.*@CommBroker.company.com:514 #this final line specifies the forwarding location ``` 3. Ensure rsyslog runs at boot: ``` chkconfig rsyslog on ``` 4. Restart the service: ``` service rsyslog restart ``` **To edit the Syslog-ng Configuration for Ubuntu LTS:** 1. Open `/etc/syslog-ng/syslog-ng.conf` for editing. 2. Define a new destination: ``` destination d_commbroker {syslog ("10.1.1.1"transport("udp")port(514));}; ``` Replace "10.1.1.1" with the IP address of the Comm Broker. 3. Add this destination to the appropriate log definition: ``` log { source(s_network); # example existing log source source(s_bro_conn); # example existing log source destination(d_commbroker); } ``` 4. Restart the service: ``` service syslog-ng restart ```