This command loads the Sensor configuration from the configured TFTP/SCP server. The TFTP/SCP server IP is specified on the Sensor. When the Sensor is added to the ISM, the configuration type should be specified as offline.
Syntax:
loadconfiguration WORD
loadconfiguration tftp WORD
loadconfiguration scp WORD
where WORD stands for the name of the configuration file on the TFTP/SCP server.
Note the following:
When loading Sensor configuration from the SCP server, you are prompted for the SCP server credentials (username and password). The command succeeds only on providing the correct SCP server credentials.
When loading Sensor configuration from the SCP server, the pathname of the file should be absolute. When loading from the configured TFTP server, the pathname of the file should be relative to /tftpboot.
The functionality of
loadconfiguration tftp WORDis the same asloadconfiguration WORD.
Applicable to:
NS-series Sensors