--- title: "loadimage" slug: "loadimage-5" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:40Z published: 2026-11-19T12:29:40Z canonical: "docs.trellix.com/loadimage-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # loadimage This command loads a Sensor image file from the configured TFTP/SCP server. **Syntax**: `loadimage WORD` `loadimage tftp WORD` `loadimage scp WORD` where `WORD` stands for the name of the image file on the TFTP/SCP server. Note the following: - When loading a Sensor image file from the SCP server, you are prompted for the SCP server credentials (username and password). The command succeeds only on providing the correct SCP server credentials. - When loading a Sensor image file from the SCP server, the pathname of the file should be absolute. When loading from the TFTP server, the pathname of the file should be relative to /tftpboot. - The functionality of `loadimage tftp WORD` is the same as `loadimage WORD`. **Applicable to:** NS-series Sensors