--- title: "loadimage" slug: "loadimage" tags: ["Reference", "IPS 10.1.10"] updated: 2026-09-23T09:41:20Z published: 2026-09-23T09:41:20Z canonical: "docs.trellix.com/loadimage" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # loadimage Upon execution, this command loads a Sensor image file from the configured SCP server. **Syntax**: loadimage scp WORD where WORD stands for the name of the image file on the SCP server. Note the following: - For NS-series Sensors, when loading a Sensor image file from the SCP server, the first attempt will be based on SSH public key authentication. If that fails, the Sensor will revert to the password authentication. - When loading a Sensor image file from the SCP server, you are prompted for the SCP server credentials (username and password). The command succeeds only on providing the correct SCP server credentials. > [!NOTE] > Note > > If SSH public key authentication is successful, you will not be prompted for the SCP server credentials. - When loading a Sensor image file from the SCP server, the pathname of the file should be absolute. **Applicable to:** NS-series Sensors