--- title: "Locally overriding remote user mappings using the CLI" slug: "locally-overriding-remote-user-mappings-using-the-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:07Z published: 2026-09-01T19:03:07Z canonical: "docs.trellix.com/locally-overriding-remote-user-mappings-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Locally overriding remote user mappings using the CLI Use the CLI commands in this topic to override remote user mappings. Prerequisites - Admin access To configure local override rules: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Displays all authorization rules, including whether they are enabled: ``` hostname (config) # show aaa authorization rules ``` 3. Enable all authorization rules: ``` hostname (config) # aaa authorization rules enable ``` 4. Disable all authorization rules: ``` hostname (config) # no aaa authorization rules enable ``` 5. To delete the specified rule, use the following command: ``` no aaa authorization rules rule ``` 6. To create a new rule or to modify an existing rule, use the following command: ``` aaa authorization rules rule ``` where` <wordPair> `is one of the following: - `append tail `creates a new rule after the highest-numbered existing rule or at position 1 if there are no rules. - `insert <ruleNumber> `creates a new rule at the specified number. If another rule is already at that position, it is shifted up by one, along with the other existing rules above it. - `set <ruleNumber> `creates a new rule at the specified number. If another rule is at that position, it is replaced. - `modify <ruleNumber> `creates or modifies the rule at the specified number. If another rule is at that position, its values are preserved, except when they are overwritten by new values specified in this command. 7. Save your changes: ``` hostname (config) # write memory ``` For command usage and parameters, see the *CLI Reference*. :