---
title: "Logon to the CLI"
slug: "logon-to-the-cli"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-10-05T15:41:06Z
published: 2026-10-05T15:41:06Z
canonical: "docs.trellix.com/logon-to-the-cli"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# Logon to the CLI
Before you can enter CLI commands, you must first log on to the Sensor with a valid user name (username is admin) and password (default is admin123).
> [!NOTE]
> Caution
>
> Trellix strongly recommends you change this password using the passwd command within your first interaction with the Sensor.
Type exit to log off.
## Debug mode
Log on to the Sensor with a valid user name (username is admin) and password (default is admin123). At the command prompt, type debug to log on to debug mode. You can now run the debug mode commands.
Type exit to log off.