--- title: "Manage Central Manager details" slug: "manage-central-manager-details" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-09-06T12:26:01Z published: 2026-10-05T15:41:20Z canonical: "docs.trellix.com/manage-central-manager-details" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Manage Central Manager details To enable trusted communication between your Manager and Central Manager, you need to specify the details of Central Manager in Manager. Once communication has been established, Central Manager can synchronize with Manager and can access its configuration. To add a Manager to Central Manager, do the following: ## Task 1. Select **Manager** → **** → **Setup** → **Central Manager**. Central Manager Trust Establishment page ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-9839B3C1-E556-438C-B9FD-10BB963F3242-low(1).png?sv=2026-02-06&spr=https&st=2026-11-22T20%3A17%3A08Z&se=2026-11-22T21%3A17%3A08Z&sr=c&sp=r&sig=bKg3r3rdqmT%2FaqIMGaQqwmc2rnVbv6VrKxGsCbd0hu4%3D) 2. Type the **Manager Name**. The **Name** must begin with a letter. The maximum length of the Name is 40 characters. > [!NOTE] > Note > > Special characters except hyphens and underscores are not allowed. 3. Enter **Central Manager** **IP Address**. This can be either IPv4 or IPv6 address. 4. The **Shared Secret** must be a minimum of 8 characters and maximum of 64 characters in length. The **Shared Secret** cannot start with an exclamation mark nor have any spaces. **Secret** parameters that can be used in Manager are: Retype the **Shared Secret** to confirm. - 26 alpha: upper and lower case (a,b,c,...z and A, B, C,...Z) - 10 digits: 0 1 2 3 4 5 6 7 8 9 - 32 symbols: ~ ` ! @ # $ % ^ & * ( ) _ + - = [ ] { } \ | ; : " ' , . [!NOTE] > Caution > > The exact, case-sensitive **Manager Name** and **Shared Secret** must also be entered into the Central Manager setup. If not, the Manager will not be able to register itself with the Central Manager. 5. Type the **Contact Information** and **Location** (Optional). 6. **Synchronization Enabled** is enabled by default. Select **No** to disable synchronization with Central Manager. 7. Click **Finish** to begin the Central Manager-Manager trust establishment process. > [!NOTE] > Note > > Trust establishment to Central Manager may take a while. You will need to Refresh the page to see the latest settings. Central Manager Details ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-7C100A7B-17CF-49C5-8ED6-1AC09E6B3C71-low(1).png?sv=2026-02-06&spr=https&st=2026-11-22T20%3A17%3A08Z&se=2026-11-22T21%3A17%3A08Z&sr=c&sp=r&sig=bKg3r3rdqmT%2FaqIMGaQqwmc2rnVbv6VrKxGsCbd0hu4%3D)