--- title: "Manage the Active Fail-Open module through a web interface" slug: "manage-the-active-fail-open-module-through-a-web-interface" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T07:33:43Z published: 2026-09-17T07:33:43Z canonical: "docs.trellix.com/manage-the-active-fail-open-module-through-a-web-interface" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Manage the Active Fail-Open module through a web interface If you have configured an IPv4 address for your Active Fail-Open chassis, you have the option to manage your Fail-Open module through a web interface. **Steps:** 1. To access the Active Fail-Open chassis web interface, enter the IPv4 address of the chassis which you have configured. The Fail-Open module web interface appears on the log-on screen. The default module or slot 1 (1:1) is displayed. To access the other 2 modules, click the drop-down arrow and choose the Slot (2:1 or 3:1). > [!NOTE] > Note > > You can also change the module from the CLI command prompt using the `set_seg x y` CLI command. Here `x` is the module number and `y` is the segment. ![GUID-4BD493ED-2C40-4317-9593-2D9BE14E7278-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-ab454f0c-0e04-eaff-15f0-3ebb8acf8520.jpg?sv=2026-02-06&spr=https&st=2026-11-20T20%3A27%3A45Z&se=2026-11-20T21%3A27%3A45Z&sr=c&sp=r&sig=IHBhhw0AJArD2BkFPbnwWF%2FGieDI%2FvY0WWhBOn9btRw%3D) 2. To log on, enter the default username and password (`Trellix00`). **Result:** You are routed to the fail-open web interface landing page which shows you information about the present settings configured in the Fail-Open module. Configuration of necessary settings is explained in the subsequent sections.