--- title: "managed-defense vpn http-proxy host <hostname> port <port> authype <authype> [username <name> password <password]" slug: "managed-defense-vpn-http-proxy-host-hostname-port-port-authype-authype" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/managed-defense-vpn-http-proxy-host-hostname-port-port-authype-authype" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # managed-defense vpn http-proxy host <hostname> port <port> authype <authype> [username <name> password <password] Sets the http-proxy host settings. The http-proxy is used in the local network to redirect the incoming and outgoing network traffic from the Trellix appliance. ### Syntax `managed-defense vpn http-proxy host <ip-address> port <port> [auth-type <authtype> [username <username> password <password>]]` ### Parameters `hostname` The name of the host. `port` The default port number for http proxy is 3128. You can use any port for this. `authtype` The http-proxy authentication type. Can be "`none`", "`basic`", or "`ntlm`". If `authtype` is "`basic`" or "`ntlm`", a username and password are required. `Username` The username. `password` The user's password. ### Example ``` et-tb5 (config) # managed-defense vpn http-proxy host 10.14.72.56 port 3128 auth-type basic username fred password EDCBA$321 ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 7.5.0 - **Central Management System:** Release 7.5.0 - Email Security — Server: Release 7.6.0 - **File Protect:** Release 7.7.0 - **Malware Analysis:** Release 7.7.0