--- title: "management interface allow" slug: "management-interface-allow" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/management-interface-allow" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # management interface allow Configures an access control list (ACL) containing permitted addresses for accessing the management interface for IPv4 or IPv6. Use the `no` form of this command to clear the configuration. ### Syntax `[no] management interface allow <network_prefix> <netmask>` ### Supported appliances This command was deprecated in Release 7.5.0 and later releases. To support IP filtering rules for both IPv4 and IPv6, use the **ip filter**, **ipv6 filter**, **show ip filter**, and **show ipv6 filter** commands. ### Parameters `network_prefix` Allowed IP address. `netmask` Network mask for the destination network in dotted decimal format (such as “255.255.255.0”) or in mask length format (such as “/24”). The address and netmask must be separated by a space. ### Example The following example adds the IP address 10.10.20.25 255.255.255.0 to the ACL for the management interface. ``` hostname (config) # management interface allow 10.10.20.25 255.255.255.0 hostname (config) # management interface allow 2001:db8::2769: ef0:1674:7f9} ```