--- title: "Management port pin-outs" slug: "management-port-pin-outs" tags: ["Install and Get Started", "IPS 10.1.10"] updated: 2026-09-23T09:38:00Z published: 2026-09-23T09:38:00Z canonical: "docs.trellix.com/management-port-pin-outs" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Management port pin-outs The Management (Mgmt) port uses a Cat 5/Cat 5e cable. | Pin # | Signal | Direction on Sensor | | --- | --- | --- | | 1 | TxD+ | Output | | 2 | TxD- | Output | | 3 | RxD+ | Input | | 4 | These pins are terminated to ground through a 75 ohm resistor & capacitor. | | 5 | | 6 | RxD- | Input | | 7 | These pins are terminated to ground through a 75 ohm resistor & capacitor. | | 8 | > [!NOTE] > Note > > Category 5 Enhanced (Cat 5e) cable is required for transmission speeds up to 1 Gigabit per second (Gigabit Ethernet). For Ethernet networks running at 10 or 100 Mbps, Category 5 (Cat 5) OR Cat 5e cable can be used. > [!NOTE] > Note > > Throughout this guide, cabling specifications will be mentioned as Cat 5/Cat 5e.