--- title: "Manager Appliance LEDs" slug: "manager-appliance-leds" updated: 2026-09-17T11:03:19Z published: 2026-09-17T11:03:19Z canonical: "docs.trellix.com/manager-appliance-leds" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Manager Appliance LEDs The front panel LEDs provide status information for the health of the Manager Appliance and the activity on its ports. The following table describes the Manager Appliance LEDs. Front panel LED indicators | Label/Icon | Color | Description | | --- | --- | --- | | Power status (a green power icon) | Solid Green | System is ON (power supply is stable and the system is running). | | Off | System is OFF (or in standby mode). | | UID (Unit Identifier) (locator icon) | Solid Blue | The Local UID (Unit Identifier) is activated to help locate the server in a rack. | | Blinking Blue | The Remote UID is activated (via IPMI). | | System Fault/Failure (often an "i" icon or an exclamation point) | Solid Red | Indicates a Critical System Error. | | Blinking Red | Indicates a Non-Critical System Error (e.g., Fan failure, Power Supply failure). | | HDD/SSD Activity (a hard drive or cylinder icon) | Blinking Green | Indicates drive read/write activity. | | LAN Activity (often labeled NIC1, NIC2, and others) | Green or Amber | Indicates network link status and activity on the corresponding LAN port. | Function of LED indicators | Label/Icon | Function | | --- | --- | | Power Button (a power symbol) | Press and hold to turn the server ON or OFF. | | UID Button (an "i" or locator icon) | Press once to toggle the blue Unit Identifier LED on or off. This helps personnel identify the correct server when working in the data center. | | USB Ports (usually 2 ports) | Standard USB ports for connecting a keyboard, mouse, or USB drive. | Chassis power supply LED indicators | Indicator Name | Color | Description | | --- | --- | --- | | Status/AC/DC OK | Solid Green | Normal operation. The power supply is properly connected to the AC power source. It functions correctly and delivers DC power to the system. | | Status/Failure | Solid Amber or Solid Red | Fault or Failure. The power supply has failed, is not providing DC power, or has a critical fault, such as over-temperature or a fan failure. The module typically needs to be replaced. | | Status/AC/DC OK | Off | No power. The cause of no power is one of the following: the AC power cord is not connected, the power switch is off, or the power supply is completely dead. | | Status/AC/DC OK | Blinking Green | Hot-swap ready/Pending. The power supply is in a standby state, waiting to be fully initialized. It might also be ready for removal or insertion (though this state is less common on all models). | :