--- title: "Managing configuration for each device" slug: "managing-configuration-for-each-device-2" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:54:23Z published: 2026-11-19T12:54:23Z canonical: "docs.trellix.com/managing-configuration-for-each-device-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Managing configuration for each device The **Devices** tab in the **Devices** page represents the physical Sensor installed in your network. Each device is a uniquely named (by you) instance of a Sensor. All actions available in the **** page customize the settings for a specific Sensor. After properly installing and initializing a Sensor, and adding the Sensor to the Manager, it appears in the **Device** drop-down list, where it was added, and inherits all of the configured device settings. After adding a device, the device can be specifically configured to meet user requirements by selecting the uniquely named device node. For more information on interfaces and subinterfaces, see Trellix Intrusion Prevention System Product Guide. > [!NOTE] > Note > > Many device configurations performed within the Devices page do not immediately update to the devices. You must update the configuration of all devices or any specific device to push the configuration information from the Manager to your device(s). The **** page for a Sensor in general contains **Summary**, **Setup**, **Maintenance**, **Troubleshooting**, **Deploy Pending Changes**, and **IPS Interfaces** pages.