--- title: "Managing licenses for NS9600, NS9500, NS7600, NS7500, NS3600, and NS3500 Sensors" slug: "managing-licenses-for-ns9600-ns9500-ns7600-ns7500-ns3600-and-ns3500-sensors-1" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:54:23Z published: 2026-11-19T12:54:23Z canonical: "docs.trellix.com/managing-licenses-for-ns9600-ns9500-ns7600-ns7500-ns3600-and-ns3500-sensors-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Managing licenses for NS9600, NS9500, NS7600, NS7500, NS3600, and NS3500 Sensors The NS9600, NS9500, NS7600, NS7500, NS3600, and NS3500 Sensors require a software license to activate the baseline throughput of 20 Gbps on NS9600 Sensors, 10 Gbps on NS9500 Sensors, 5 Gbps on NS7600 Sensors, 3 Gbps on NS7500 Sensors, 1 Gbps on NS3600 Sensors, and 750 Mbps on NS3500 Sensors. The license is provided as a .zip or .jar file (for example, **CapacityLicense3Gig.jar** for a new license and **CapacityLicense3to5.jar** for an upgrade license). The Manager supports both the formats. The license procured contains the details of the Sensor's throughput. The Manager checks the compliance periodically to check the number of licenses against the Sensor's throughput. > [!NOTE] > Note > > You must first purchase a license to enable traffic inspection in NS9600, NS9500, NS7600, NS7500, NS3600, and NS3500 Sensors. To obtain a license, contact Trellix Sales. **Managing licenses in NS9600, NS7600, and NS3600 Sensors** In case of the NS9600 (standalone and in fail-over pair), NS7600 and NS3600 Sensors (individual and in fail-over pair), a new license with a higher throughput is required to increase the throughput of the Sensor. If you are using NS9600 stack, you can combine multiple licenses of different capacity to achieve the throughput required and assign them to the stack. For example, the throughput requirement of NS9600 stack (2-node) is 120 Gbps. While assigning licenses, you can import and assign any combination of licenses (20 + 40 + 60 Gbps) or, (60 + 60 Gbps) to achieve the throughput requirement of 120 Gbps. If you are using a NS9600 stack fail-over setup, use the capacity licenses for NS9600 Sensor failover to achieve the required throughput. Various throughputs available for NS9600, NS7600, and NS3600 Sensors are as follows: | Sensor | Capacity License | | --- | --- | | NS9600 Standalone NS9600 stack (2-node) | 20 Gbps | | 40 Gbps | | 60 Gbps | | NS7600 | 5 Gbps | | 10 Gbps | | 15 Gbps | | 20 Gbps | | NS3600 | 1 Gbps | | 3 Gbps | | 5 Gbps | For more information on licenses, see the individual hardware guides available for NS9600, NS7600, and NS3600 Sensors. > [!NOTE] > Note > > Upgrade capacity licenses are not available for NS9600, NS7600, and NS3600 Sensors. **Managing licenses in NS9500 and NS7500 Sensors** In the case of the NS9500 standalone and stack, and NS7500 Sensors, a new license with higher throughput, or upgrade license is required to increase the throughput of the Sensor. Various throughputs available for NS9500 and NS7500 Sensors are as follows: | Sensor | Existing license | *Upgrade license | | --- | --- | --- | | NS9500 standalone > [!NOTE] > Note > > You must have a stack Sensors setup to upgrade licenses from Standalone to Stack. | 10 Gbps | - 10 to 20 Gbps - 10 to 30 Gbps Standalone to stack: - 10 to 40 Gbps - 10 to 60 Gbps - 10 to 100 Gbps | | 20 Gbps | - 20 to 30 Gbps Standalone to stack: - 20 to 40 Gbps - 20 to 60 Gbps - 20 to 100 Gbps | | 30 Gbps | Standalone to stack: - 30 to 40 Gbps - 30 to 60 Gbps - 30 to 100 Gbps | | NS9500 stack | 40 Gbps | - 40 to 60 Gbps - 40 to 100 Gbps | | 60 Gbps | 60 to 100 Gbps | | 100 Gbps | NA | | NS7500 | 3 Gbps | - 3 to 5 Gbps - 3 to 7.5 Gbps | | 5 Gbps | 5 to 7.5 Gbps | | 7.5 Gbps | NA | | *Upgrade capacity licenses are available for perpetual licenses only. Those are not applicable for demo or subscription licenses. | You can add and assign the license from the **Licenses** page in the Manager. In the Manager, select **Manager** → **** → **Setup** → **Licenses**. ![system_license_1.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-cb3cd053-1c3c-fe71-8b56-a4a4bb68edf5.png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A14%3A07Z&se=2026-11-20T08%3A14%3A07Z&sr=c&sp=r&sig=Mw9pmaxQkAYFrH5lUn0JUHv8LkLQfYbOjDINl4KYNw0%3D) > [!WARNING] > Important > > You can assign licenses to NS9600 stacked Sensors, or stacked Sensors in fail-over pair only from the **Devices** → **** → **Global** → **Device Manager** page. The following details are displayed on the **System** tab: | Option | Definition | | --- | --- | | **Required** | **Model** – Sensor model compatible with the license **Capacity** – Throughput limit for the license | | **Assigned To** | Name of the Sensor assigned to the license | | **License Details** | **Customer** – Customer for whom the license file was generated **Grant ID** – Trellix Grant ID of the corresponding customer **Key** – License key number of the customer **Expiration** – Applicable only for demo and subscription licenses - ![GUID-E9D50264-CAFF-4207-8FAC-77D0B81FDCF3-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-aaf997ab-fe3f-0cb2-30a0-e2b608c0ee6e(4).png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A14%3A07Z&se=2026-11-20T08%3A14%3A07Z&sr=c&sp=r&sig=Mw9pmaxQkAYFrH5lUn0JUHv8LkLQfYbOjDINl4KYNw0%3D): Valid license - ![GUID-AEDC1E61-B468-42EB-B5DC-E5CE5CE2485B-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-e24f7bf9-ad54-c41a-9ac4-9e2e93ab4dea(3).png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A14%3A07Z&se=2026-11-20T08%3A14%3A07Z&sr=c&sp=r&sig=Mw9pmaxQkAYFrH5lUn0JUHv8LkLQfYbOjDINl4KYNw0%3D): Expired license - ![GUID-28FE5921-ACF1-491C-B376-930A589BF74C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-34eb39b2-4d3f-f2e3-e0db-9029d8dbfe3d(4).png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A14%3A07Z&se=2026-11-20T08%3A14%3A07Z&sr=c&sp=r&sig=Mw9pmaxQkAYFrH5lUn0JUHv8LkLQfYbOjDINl4KYNw0%3D): Expired license running on grace period > [!NOTE] > Note > > A grace period of **30 days** is provided to subscription-based **System** licenses after they expire. Post grace period, the Sensor continues to inspect traffic, and operates with the existing signature set and configuration. The Manager, however, will not be able to deploy new signature sets or policies to the Sensor until a valid license is assigned. **Type** – Displays if the license is **Perpetual**, **Subscription**, or **Evaluation (Demo)** type > [!NOTE] > Note > > It is recommended to install subscription license from Manager version 10.1.7.44 and later. | | **Added** | **Time** – Date in format, and time when the license was added **By** – Name of the user who added the license | | **Comments** | Enables you to add your comment per license file that is imported. Double-click in the **Comment** field and enter your comment. Click outside this field and your comment is automatically saved. | The following actions can be performed on the **System** tab: - [Add a license to the Manager](/network-and-platform/docs/add-a-license-to-the-manager-2) - [Assign a license to a Sensor](/network-and-platform/docs/assign-a-license-to-a-sensor-2) - [Unassign a license from a Sensor](/network-and-platform/docs/unassign-a-license-from-a-sensor-2) - [Upgrade an existing capacity license](/network-and-platform/docs/upgrade-an-existing-capacity-license-2) - [Remove a license from the Manager](/network-and-platform/docs/remove-a-license-from-the-manager-2) > [!NOTE] > Note > > Beginning with version 11.1 M12, advanced Proxy SSL inspection features are natively unlocked by your Base System License. Separate feature activations or license entries are no longer required.