--- title: "Manual license installation" slug: "manual-license-installation-5" tags: ["Network Security (NX)"] updated: 2026-11-18T21:01:13Z published: 2026-11-18T21:01:13Z canonical: "docs.trellix.com/manual-license-installation-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Manual license installation If the license update feature is not enabled, you need to install license keys manually. Licenses need to be installed when an evaluation license expires or when a license expires or no longer meets your needs. In addition, replacement licenses need to be installed after a Return Material Authorization (RMA). You can obtain your license keys from the **Assets** tab in the Trellix [Customer Support Portal](https://support.trellix.com/) or by sending an email that includes the MAC address of your appliance to [licensing@trellix.com](mailto:licensing@trellix.com). There are two ways to manually install licenses, described in the following topics: - [Installing licenses using the Web UI](/network-and-platform/docs/manual-license-installation-5#installing-licenses-using-the-web-ui) - [Installing licenses using the CLI](/network-and-platform/docs/manual-license-installation-5#installing-licenses-using-the-cli) #### Installing licenses using the Web UI Use the **Appliance License Settings** page to install licenses on the Network Security appliance. ![CM_LicenseSettings_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-870a8656-c579-b88a-b9f8-bfc18c31ee4e.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A46%3A15Z&se=2026-11-20T07%3A46%3A15Z&sr=c&sp=r&sig=Lm8uvfEvn%2B6vGwXyPUbnD6LJEktILXzdVM7Bed2YwZA%3D) ![All_LicenseSettings_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-9ec37f33-8671-d71c-9e86-36034a3688e1(4).png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A46%3A15Z&se=2026-11-20T07%3A46%3A15Z&sr=c&sp=r&sig=Lm8uvfEvn%2B6vGwXyPUbnD6LJEktILXzdVM7Bed2YwZA%3D) > [!NOTE] > Note > > Clicking the **Enable VPN** link in the **Description** column for an MD_ACCESS license allows you to connect the appliance to Managed Defense over the Internet using a secure SSL VPN connection. For details, see the *Managed Defense* *Quick Start Guide*. Prerequisites - Admin or Operator access. - The appliance does not already have the type of license key you are installing. To install license keys using the Web UI: 1. Click the **Settings** tab. 2. Click **Appliance Licenses** on the sidebar. 3. Paste the license key you obtained from Trellix in the **License Key** box. 4. Click **Add**. The page refreshes to show the license key in the table. If the key is valid, the **Valid** column shows a check mark and additional information is displayed about the license. ##### Removing licenses using the Web UI Use the **Appliance License Settings** page to remove licenses. > [!NOTE] > Note > > The Intelligent Virtual Execution - Server appliance has a CLI and a Web UI. The recommended method for this configuration on a Intelligent Virtual Execution - Server appliance is through the Central Management System Web UI. Prerequisites - Admin or Operator access To remove license keys: 1. Click the **Settings** tab. 2. Click **Appliance Licenses** on the sidebar. 3. Click the icon in the **Delete** column in the row for the license you want to remove. 4. Click **Yes** in the confirmation message that appears. #### Installing licenses using the CLI Use the CLI commands in this topic to install licenses on the NX appliance. Prerequisites - Admin or Operator access To install licenses: 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. Install each license: ```plaintext hostname (config) # license install ``` > [!NOTE] > Note > > You can enter the license keys sequentially separated by spaces as shown above, or enter `license install` and then press Enter to be prompted to enter the license keys one at a time. 3. Verify the licenses: ```plaintext hostname (config) # show licenses License 1: LK2-FIREEYE_APPLIANCE-0000-0000-0000-0000-0000-0000-0000-0000-0000 Feature:             FIREEYE_APPLIANCE Description:         FireEye Appliance Valid:               yes Start date:          2016/11/21 (ok) Tied to Appl ID:     000000000000 (ok) Product:             eMPS (ok) Type:                PROD (ok) Agreement:           EULA (ok) Active:              yes ... License 2: LK2-CONTENT_UPDATES-0000-0000-0000-0000-0000-0000-0000-0000-0000 Feature:             CONTENT_UPDATES Description:         Content updates Valid:               yes Start date:          2016/11/21 (ok) End date:            2017/11/21 (ok) Tied to Appl ID:     000000000000 (ok) Sharing:             all (ok) Active:              yes License 3: LK2-FIREEYE_SUPPORT-0000-0000-0000-0000-0000-0000-0000-0000-0000 Feature:             FIREEYE_SUPPORT Description:         FireEye Support Valid:               yes Start date:          2016/11/21 (ok) End date:            2017/11/21 (ok) Tied to Appl ID:     000000000000 (ok) Sharing:             all (ok) Active:              yes ... ``` 4. Save your changes: ```plaintext hostname (config) # write memory ``` ##### Removing licenses using the CLI Use the CLI commands in this topic to remove licenses. Prerequisites - Admin or Operator access To remove licenses: 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. List the installed licenses: ```plaintext hostname (config) # show licenses License 1: LK2-FIREEYE_APPLIANCE-0000-0000-0000-0000-0000-0000-0000 Feature:             FIREEYE_APPLIANCE Description:         FireEye Appliance Valid:               yes Start date:          2016/11/01 (ok) Tied to appl ID:     000000000000 (ok) Product:             MPS (ok) Type:                PROD (ok) Agreement:           EULA (ok) Op Mode:             inline (ok) Active:              yes ... License 2: LK2-CONTENT_UPDATES-0000-0000-0000-0000-0000-0000-0000 Feature:             CONTENT_UPDATES Description:         Content updates Valid:               yes Start date:          2016/11/01 (ok) End date:            2017/11/01 (ok) Tied to appl ID:     000000000000 (ok) Sharing:             all (ok) Active:              yes License 3: LK2-FIREEYE_SUPPORT-0000-0000-0000-0000-0000-0000-0000 Feature:             FIREEYE_SUPPORT Description:         FireEye Support Valid:               yes Start date:          2016/11/01 (ok) End date:            2017/11/01 (ok) Tied to appl ID:     000000000000 (ok) Sharing:             all (ok) Active:              yes ``` 3. Specify the license ID to remove an individual license. For example, is the license ID for the Support license shown in the previous example. ```plaintext hostname (config) # license delete 3 ``` 4. Save your changes. ```plaintext hostname (config) # write memory ``` > [!NOTE] > Note > > The `show licenses` command output in this procedure shows the basic licenses installed on a Network Security appliance. The output is similar for Network Security appliances.