--- title: "Manual time configuration" slug: "manual-time-configuration-5" tags: ["Network Security (NX)"] updated: 2026-09-10T17:50:31Z published: 2026-09-10T17:50:31Z canonical: "docs.trellix.com/manual-time-configuration-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Manual time configuration You can manually set the date and time on your Network Security appliance. - [Setting the date and time using the Web UI](/network-and-platform/docs/manual-time-configuration-5#setting-the-date-and-time-using-the-web-ui) - [Setting the date and time using the CLI](/network-and-platform/docs/manual-time-configuration-5#setting-the-date-and-time-using-the-cli) #### Setting the date and time using the Web UI Use the top section of the **Date and Time Settings** page to set the date and time for your Network Security appliance. > [!NOTE] > Note > > The Intelligent Virtual Execution - Server appliance has a CLI and a Web UI. The recommended method for this configuration on a Intelligent Virtual Execution - Server appliance is through the Central Management System Web UI. ![All_Settings_DateManual_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-142515c2-784a-3f8e-0df1-6919560e0cdc(4).png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A27%3A55Z&se=2026-11-20T08%3A27%3A55Z&sr=c&sp=r&sig=uzQm6Z%2Fi47nWsRftTLHH8HxagJpcjG8CBBCVqX118nU%3D) > [!WARNING] > Important > > NTP synchronization is set by default and must be disabled before you can manually configure the date and time. For instructions about disabling NTP, see [NTP server configuration](/network-and-platform/docs/ntp-server-configuration-5) . > [!NOTE] > Note > > If you manually configure the time of Endpoint Security (HX) servers, be sure the server times of all your Endpoint Security (HX) servers are synchronized. A number of Endpoint Security (HX) services (including PKI services and transport layer security services) require that the dates and times of your Endpoint Security (HX) servers be accurate and synchronized within five seconds of each other. If you use NTP synchronization, the dates and times of your Endpoint Security (HX) servers will be synchronized automatically. Prerequisites - Admin access To set the date and time: 1. Click the **Settings** tab. 2. Click **Date and Time** on the sidebar. 3. Select the date and time from the drop-down lists. 4. Click **Update Time**. 5. Set the time zone as described in [Time zone configuration](/network-and-platform/docs/time-zone-configuration-5) . #### Setting the date and time using the CLI Use the CLI commands in this topic to set the time zone on your Network Security appliance. > [!WARNING] > Important > > NTP synchronization is set by default and must be disabled before you can manually configure the date and time. For information about disabling NTP, see [NTP server configuration](/network-and-platform/docs/ntp-server-configuration-2). > [!NOTE] > Note > > If you manually configure the time of Endpoint Security (HX) servers, be sure the server times of all your Endpoint Security (HX) servers are synchronized. A number of Endpoint Security (HX) services (including PKI services and transport layer security services) require that the dates and times of your Endpoint Security (HX) servers be accurate and synchronized within five seconds of each other. If you use NTP synchronization, the dates and times of your Endpoint Security (HX) servers will be synchronized automatically. Prerequisites - Admin access To set the date and time: 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. (Optional) Use the `clock set <HH>:<MM> <YYYY>/<MM>/<DD>` command to specify the time and date. For example, the following command sets the time and date to 2:00 p.m. on July 21, 2014: ```plaintext hostname (config) # clock set 14:00 2014/07/21 ``` 3. Use the `clock timezone <timezone>` command to specify the time zone. For example, both of the following commands set the time zone to Pacific Standard Time: ```plaintext hostname (config) # clock timezone UTC-offset UTC+8 ``` ```plaintext hostname (config) # clock timezone America North United_States Pacific ``` > [!NOTE] > Note > > The time zone is for display purposes and should match other security device settings. 4. To restore the default time zone: ```plaintext hostname (config) # no clock timezone ``` 5. View the configured time and date settings: ```plaintext hostname (config) # show clock ``` 6. Save your changes. ```plaintext hostname (config) # write memory ``` ###### Examples - Time and date using the North America Central Daylight time zone: ```plaintext hostname > show clock Time:        16:39:35 Date:        2014/06/25 Time zone:   America North United_States Central             (US/Central) UFC offset: -0500 (UTC minus 5 hours) ``` - Time and date settings using the default time zone: ```plaintext hostname > show clock Time:         21:40:37 Date:         2014/06/25 Time zone:    UTC              (Etc/UTC) UTC offset:   same as UTC ```