--- title: "Manually deploying a Network Security instance in AWS" slug: "manually-deploying-a-network-security-instance-in-aws" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-08-20T07:20:32Z published: 2026-09-09T22:45:46Z canonical: "docs.trellix.com/manually-deploying-a-network-security-instance-in-aws" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Manually deploying a Network Security instance in AWS The following table summarizes the steps to manually deploy a Network Security instance in AWS. | Task | Description | | --- | --- | | **1**. Ensure that requirements are met. | [AWS requirements](/docs/aws-requirements) | | **2**. Launch the instance. | [Creating the Network Security instance](/docs/creating-the-network-security-instance-manual-method-only) | | **3**. Create and attach the network interfaces. | [Configuring Network Securitynetwork interfaces on AWS](/docs/configuring-network-security-network-interfaces-on-aws-manual-method-only) | | **4**. (*Optional*) Apply the activation code and configure the initial admin password for the instance. | [Configuring the activation code and initial admin password](/docs/configuring-the-activation-code-and-initial-admin-password-manual-method-only) | | **5**. *If using a static IP address for the ether1 interface*: Configure the IP address. | [Configuring a static IP address for the ether1 interface](/docs/configuring-a-static-ip-address-for-the-ether1-interface-manual-method-only) | | **6**. Start the instance and perform the initial configuration. | [Performing the initial Network Security configuration using AWS](/docs/performing-the-initial-network-security-configuration-using-aws) | | **7**. Configure IP addressing for the monitoring interfaces on the Network Security instance. | [Configuring monitoring ports on the Network Security instance](/docs/configuring-monitoring-ports-on-the-network-security-instance) | | **8**. *Inline mode*: Perform the procedures in a supported use case scenario. | [Deploying Network Security instances in AWS in inline mode](/docs/deploying-network-security-instances-in-aws-in-inline-mode) | | **9**. *TAP or SPAN mode*: Create traffic mirror sessions to copy the traffic from network interfaces. | [Configuring traffic mirroring on AWS for TAP or SPAN mode](/docs/configuring-traffic-mirroring-on-aws-for-tap-or-span-mode) | | **10**. (*Optional*) Enable HTTP health checks for AWS network load balancing (NLB). | [Enabling HTTP health checks for network load balancing on AWS](/network-and-platform/docs/filepaligotmpfireeye639c5254d513220214dgcontenttopicsawsdgawshttphealthcheckshtm) | | **11**. *Optional*: If you determine your instance is too small or too large for your needs, you can change the instance type. | [Changing an AWS instance type](/docs/changing-an-aws-instance-type) | ### Note You can alternatively create the virtual appliance using an AWS CloudFormation template, described in [AWS CloudFormation template deployment](/docs/using-an-aws-cloudformation-template-to-deploy-a-network-security-instance). :