--- title: "media usb auto-mount enable" slug: "media-usb-auto-mount-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/media-usb-auto-mount-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # media usb auto-mount enable To specify whether a USB device is auto-mounted to the attached appliance, use the **media usb mount enable** command in configuration mode. The **no** form of this command disables auto-mounting on a USB device. You must enable auto-mounting at the same time the USB device is attached. By default, auto-mounting is disabled. The first partition is mounted in the `/media/usb1` directory. You can only auto-mount the first USB device. To unmount the USB device before it is disconnected, use the **media usb eject** command. ### Syntax `[no] media usb mount enable` ### User role Admin ### Supported appliances Command was introduced before Release 7.5.0. ### Parameters None ### Example The following example enables auto-mounting on the USB device to the attached appliance. ``` hostname (config) # media usb auto-mount enable ```