--- title: "media usb web-access enable local" slug: "media-usb-web-access-enable-local" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/media-usb-web-access-enable-local" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # media usb web-access enable local To enable HTTP access on the loopback interface on the appliance, use the **media usb web-access enable local** command in configuration mode. The **no** form of this command disables HTTP access on the loopback interface. This command specifies whether a mounted USB device is used for HTTP access on the loopback interface. Local web access is enabled by default. Use the **media usb web-access top-dir** command to configure the top-level directory for HTTP access. ### Syntax `[no] media usb web-access enable local` ### User role Admin ### Parameters None ### Example The following example enables HTTP access on the loopback interface: ``` hostname (config) # media usb web-access enable local ``` ### Supported appliances Command was introduced before Release 7.5.0.