--- title: "media usb web-access top-dir" slug: "media-usb-web-access-top-dir" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/media-usb-web-access-top-dir" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # media usb web-access top-dir To configure the top-level directory in the first partition of a USB device for HTTP access, use the **media usb web-access top-dir** command in configuration mode. The **no** form of this command resets the default setting. When the **media usb web-access enable local** command is enabled and a USB device is mounted, you can access the top-level directory on the partition from the `http://localhost/media/usb1/directory-name` location. By default, you can access only the contents of the `fireeye` directory in the partition from the `http://localhost/media/usb1/fireeye` URL. ### Syntax `media usb web-access top-dir <directory name>` `[no] media usb web-access top-dir` ### Parameters `directory-name` Name of the top-level directory for the partition that is used for HTTP access. The default directory name is `fireeye`. ### Example The following example specifies the top-level directory as `Trellix` for HTTP access: ``` hostname (config) # media usb web-access top-dir trellix ``` ### User role Admin ### Supported appliances Command was introduced before Release 7.5.0.