--- title: "Modifying managed appliance information using the CLI" slug: "modifying-managed-appliance-information-using-the-cli-3" updated: 2026-10-01T08:37:47Z published: 2026-10-01T08:37:47Z canonical: "docs.trellix.com/modifying-managed-appliance-information-using-the-cli-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Modifying managed appliance information using the CLI Use the commands in this section to modify information about managed appliances. ### Caution Do not change an appliance's hostname if the appliance initiated the connection to the Central Management System appliance. ### Note This section does not include all appliance modification commands. For a full list of commands, see the` cmc appliance <applianceName> `commands in the *CLI Command Reference*. To modify appliance information: 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. To change the appliance IP address: ```plaintext hostname (config) # cmc appliance address | ``` 3. To rename the appliance: ```plaintext hostname (config) # cmc appliance rename ``` 4. To add or modify a comment about the appliance: ```plaintext hostname (config) # cmc appliance comment "" ``` where` commentText `must be enclosed in double quotation marks. 5. To change the remote user: ```plaintext hostname (config) # cmc appliance auth password username ``` 6. To change the password: ```plaintext hostname (config) # cmc appliance auth password password ``` 7. Verify your changes: ```plaintext hostname (config) # show cmc appliance ``` 8. Save your changes: ```plaintext hostname (config) # write memory ``` ### Note This procedure shows how to change the credentials for password authentication. For information about changing ssh-dsa2 and ssh-rsa2 authentication credentials, see [Configuring User Authentication Using the CLI](/network-and-platform/docs/configuring-user-authentication-using-the-cli-2) . To configure a host key for global host-key authentication, see [Importing a Global Host Key Using the CLI](/network-and-platform/docs/importing-a-host-key-into-the-global-host-keys-database-using-the-cli-4) . ### Example This example changes the NX-04 appliance name and comment. ```plaintext hostname (config) # cmc appliance NX-04 rename NX-07 hostname (config) # cmc appliance NX-07 comment "Network Security appliance" ```