--- title: "Monitoring port details" slug: "monitoring-port-details-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/monitoring-port-details-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Monitoring port details The following are the details of the monitoring ports displayed on the **Monitoring Ports** tab. **Monitoring port details** | Column | Description | | --- | --- | | **Port** | Specifies the monitoring port | | **Link** | Specifies the status of the monitoring port. The available statuses are: - **Up** - **Down** - **Disabled** | | **Connector Type** | Displays the connector type | | **Serial Number** | Displays the serial number | | **Speed** | Specifies the speed of the port. The following are the available speed: - **Auto-negotiate** - **1 Gbps(full)** - **100 Mbps(full)** - **100 Mbps(half)** - **10 Mbps(full)** - **10 Mbps(half)** - **10 Gbps(full)** - **40 Gbps(full)** - **100 Gbps(full)** | | **Operation** | | **Mode** | Specifies the mode of operation. The following are the available modes: - **Inline Fail Open - Active** - **Inline Fail Open - Passive** - **Inline Fail Closed** - **SPAN or Hub** - **Tap** | | **Fail-Open Kit** | Displays the status of the fail open kit. The following are the available status: - **Present** - **Built in** - **Unknown** - **n/a** | | **Placement** | Displays the area of the network where the port is connected. The options are: - **Inside Network** - **Outside Network** | | **Response Port** | Specifies the path of response for the device. The available options are: - **This port** - **R1** - **R2** | ### Display options for Monitoring ports **Display options for Serial Number** The following Serial Numbers are displayed on **Monitoring Ports** tab: - **Transceiver Serial Number** - Displays the Transceiver Serial Number in the **Serial Number** column - **I/O Module Serial Number** - Displays the network module serial number in a grid view - **Last Seen Serial Number** - Displays the **Last Seen** Serial Number as ![GUID-30813FEA-A052-4E11-B0E5-6B0734EB0A1A-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-2d5d21c8-c601-dd6d-b062-337548930317(7).jpg?sv=2026-02-06&spr=https&st=2026-11-20T12%3A42%3A31Z&se=2026-11-20T13%3A42%3A31Z&sr=c&sp=r&sig=0x02b3%2FrCDyagIMAraymSVTXj33rNuMRClvGfOXFzIE%3D), when the Manager fails to read active Serial Number or if the Transceiver/Network module is removed. > [!NOTE] > Note > > If users see any anomaly in the displayed Transceiver Serial Number, it is recommended that they make the link up and then check the Serial Number again. By doing so, the last seen Serial Number is also updated properly. > [!NOTE] > Note > > Whenever a Transceiver is replaced, the port gets disabled and user has to enable the port irrespective of the operating mode. **Display options for Serial Number**![Display options for Serial Number](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-275fc709-2f9b-c325-938c-089dd204e4f2(7).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A42%3A31Z&se=2026-11-20T13%3A42%3A31Z&sr=c&sp=r&sig=0x02b3%2FrCDyagIMAraymSVTXj33rNuMRClvGfOXFzIE%3D) | Callout | Description | | --- | --- | | 1 | Displays the Transceiver Serial Number | | 2 | Displays the I/O Module Serial Number | | 3 | Displays the **Last Seen** Serial Number | > [!NOTE] > Note > > For RJ-45 module, the Serial Number is displayed as **Not Applicable**. You have the following options to view the details of the list of monitoring ports: - **Show All Ports** - Displays the list of all monitoring ports - **Hide Empty Slots** - Hides ports that have empty slots and displays only those ports that are configured