--- title: "Monitoring traffic in NTBA Appliance" slug: "monitoring-traffic-in-ntba-appliance" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:08Z published: 2026-10-05T15:40:08Z canonical: "docs.trellix.com/monitoring-traffic-in-ntba-appliance" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Monitoring traffic in NTBA Appliance You can monitor traffic per NTBA Appliance to check if traffic is going through the device, zone, or its exporter's interface. ## Task 1. Select **Devices** → **Devices** → **** → **Troubleshooting** → **Traffic Throughput**. The **Traffic Throughput** page is displayed. By default **Device** is selected. Traffic throughput for NTBA Appliances ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-1066726E-0496-43E3-9EB3-FDBB8C5D8069-low(1).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A26%3A43Z&se=2026-11-20T13%3A26%3A43Z&sr=c&sp=r&sig=t9i4n1YaSei6KXE%2BxUYPyCg0zxPcv8bpG%2BewHp%2F9wls%3D) 2. Select **Device** to generate a bar graph showing the total bytes observed in each direction for the last hour. 3. Select **Zones** to display the throughput for each zone in each direction with the time when the last packet was seen on that zone. You can use the **Search** field to search by a particular zone of the device. 4. Select **Exporters** to display the combination of exporter and interface, its line speed, and the utilization percentage in each direction. You can use the **Search** field to search by a particular zone of the device.