--- title: "msm common certs deploy" slug: "msm-common-certs-deploy" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/msm-common-certs-deploy" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # msm common certs deploy Use this command to deploy the MTP SSL certificates from the staging directory into the operational directory and then reboot the MX Series appliance so that the new certificates take effect. In order for the command to succeed, the SSL authentication items must meet the following requirements: - The SSL certificate must be a `.pem` file. If the certificate is a Microsoft `.p12` or `.pfx` file, convert the file to PEM format. - The public key in the certificate must match the public portion of the private key. - If the SSL certificate is signed by a trusted third-party CA (as is required for **ether1**), verify that the SSL chain includes all intermediate certificates, from host certificate to root CA. If the CA bundle is not in correct chain order, re-order the certificates. > [!WARNING] > Important > > If the command fails, the system does not deploy the certificate to the truststore, and the appliance does not reboot. After you correct the problem, upload the corrected SSL authentication items to staging, and deploy the corrected certificate to the SSL truststore. ### Syntax ``` msm common certs deploy ``` ### Parameters None ### Examples After you use the **Settings > SSL Certificates** page of the Web UI to upload SSL authentication items for **ether1** or **ether2** to the MX Series appliance staging directory, deploy and activate the SSL certificates: ``` hostname (configure) # msm common certs deploy ``` For more information, see the Trellix MTP Management Appliance System Configuration Guide. ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:**Trellix MTP Management Appliance Release 2.0.1.